Oct 30, 2015

Digital Deer Painting Maple Leaves Adjustment

As you saw in my previous post, I've been playing around ArtRage's Sticker Spray tool to paint leaves on my maple tree. I said one of the nice things about this tool is that, after you've sprayed your leaves on the tree, you can still go back and move, rotate, scale, and flip individual leaves to get a more natural look. Today I've discovered you can also go back and adjust the hue, saturation, and luminosity of individual leaves which helps even more in reducing a repetitive look in your tree.

Here's an example of a little problem area in my tree. We have a few leaves near each other that are too similar. I've circled the groups of similar leaves that I want to change.


You can tell with the orange leaves circled in blue that they are actual the same leaf image. While my maple leaves Sticker Spray variation settings do have some randomness to the color and rotation, sometimes that randomness just doesn't produce a noticeable difference. This is where we need to go in and tweak some of the leaves.

When I right-click on a leaf sticker in ArtRage I get a menu. Selecting the option for Sticker Tint brings up another panel with adjustment sliders for Hue, Luminance, and Saturation, as well as RGB (Red, Green, Blue).

My main gripe about this tool is there is no preview. So you don't know what your adjustments are going to do to your leaf until after you apply it by clicking OK. Then if you don't like the results you have to use Undo and try again. Fortunately, it didn't take too much fiddling to get a feel of what it does, so it wasn't too bad.

Here's another image after I did some quick moving, rotating, and adjusting of leaf colors. In this picture, if someone hadn't pointed it out to you, I think you'd be much less likely to notice some of the leaves were actually created from the same image. So with just a few quick tweaks we have things looking a bit more natural.


You can adjust things like opacity on individual stickers, which might be useful when painting things like rain drops, or balloons, or jellyfish. But I don't have much use for that here so we'll leave it at this for now.

Oct 29, 2015

Digital Deer and Maple Tree Painting - WIP6

Well, progress has been pretty slow on this painting, I admit. Not because it's a difficult painting, but because I have been spending a lot of time playing with ArtRage. This is only the second painting I've done that has ArtRage work in it so AR is still pretty new to me. My previous AR painting was my Cardinals Christmas Feast painting, but I only did the background for that in AR. All the rest was done in Photoshop. So I still have a lot to learn about AR.

One thing I played around with a lot in AR recently was the Sticker Spray brush. Here's some of the AR interface, and I've labeled some of the tools I'm using for those of you not familiar with AR.



So what is Sticker Spray, exactly? It's a tool that lets you apply multiple pre-made images to your painting very quickly. I was playing with this tool because I wanted to find a way to "paint" the maple leaves on the tree without having to paint each and every leaf individually. I had already spent a considerable amount of time painting these leaves by hand for my previous painting, Autumn Acquaintances, so I figured I might as well take advantage of that and reuse some of those leaves. After all, that's one of the advantages of digital painting!

 So, to use these leaves in an ArtRage Sticker Spray I had to the original leaves from my Photoshop image and lay them out in a grid as such, and save that image file out as a png to import into ArtRage's Sticker Sheets:


Here is the Sticker Sheets panel in ArtRage. I won't into detail on how to do this since there are lots of tutorials out there, and instructions on the AR site and in the manual, on how to do this. But as you can see, I've added my sheet of leaves there at the bottom.


That was actually the easy part. The hard part was playing with all those variables on that Spray Variations panel to get it to look right. I had to spend a lot of time tweaking the rotation and size and color to get it to look natural when I "sprayed" the leaves on the tree. Initially I was getting blue leaves, upside down leaves, and all sorts of weird things going on!

I think Photoshop has something similar where you can sort of spray on shapes with varying sizes and colors. But ArtRage lets you use pre-made full-color images rather than just shapes it adds colors to. Additionally, when you "spray" the shapes on a Photoshop layer they are stuck in place. In AR you can go back and move, scale, or rotate individual leaves after you have sprayed them down. This is important because the spray tool picks leaves from the Sticker Sheet at random and sometimes you end up with two of the same leaf right next to each other, which doesn't look very natural. So after I filled my tree with leaves I had to go in and move some individual leaves around to give it a more natural look.

So here's the painting with the leaves sprayed in and tweaked. I did them on two layers, one layer behind the tree trunks that have leaves that are a little smaller to make them look a little farther away, then a layer in the front with larger leaves.


So this is where I am now. I still have a lot more to do with the leaves. I need to go in and add shadows to give it a dappled sunshine look. And, of course, all the foreground work still needs to be done. So next will be doing some grass and fallen leaves on the ground. Grass can also be "sprayed" on with the Sticker Spray tool. Unfortunately, I don't have any digital clumps of grass to steal from my previous paintings so I'm going to have to make the grass from scratch. So that's what I'll be working on next. So look for grass in my next post!


Oct 20, 2015

Digital Deer and Maple Tree Painting - WIP5

After mostly finishing up the tree bark on my deer painting I decided I wanted to change the dimensions of the canvas. This is another advantage of painting digitally. You can change your mind about things and alter them a lot easier than on a real canvas painting. Here I extended the digital canvas size vertically to create a square, rather than rectangular, painting. You can see where the top line used to be, where the leaves stop. I also extended the bottom of the image a little bit, but not as much as the top because I didn't want the deer to be dead center in the image. Having them off-center a little gives a more pleasing composition.

So the last few days I've been working on extending the tree trunks and branches up to fill that new extra space. I'll obviously need to add more maple leaves too.



OK, so now you're probably wondering, why did I give myself that extra work? Well, as you may know from previous posts, I license my art to manufacturers for use on various products. Creating a square canvas gives me more flexibility, making the artwork suitable for more products. The square image above can now be cropped vertically for use on something like flags, or cropped horizontally for things like placemats, or even cropped into a circle for use on plates. The original horizontal version would not have worked for flags or plates. So by extending it vertically I've just given myself at least 2 more potential licensing options.

Well, now back to painting branches and leaves!

Oct 17, 2015

Digital Deer and Maple Tree Painting - WIP4

More work done on the background here, the most obvious being the addition of the distant background and sky. Although not all that realistic for the time of day in this scene, I decided to color the sky more like sunset to maintain color harmony with the autumn leaves.


I've also added more texture to the tree trunks. To better show the trunk detail I have hidden my sketch layer for this shot, as you may have noticed. I didn't delete it, though. I still have it in my working file to display as needed.

Here's a detail of the bark:



Still working in ArtRage on this part of the painting.

Oct 16, 2015

Digital Deer and Maple Tree Painting - WIP3

More progress on my autumn doe and buck painting. I spent some time working on the tree trunks, getting those roughed in. For this part I switched from Photoshop to ArtRage to get a more painterly look in the tree bark. Fortunately, the creators of ArtRage, Ambient Design, had Photoshop users in mind when they developed this software, so moving from Photoshop to ArtRage and back is very easy. ArtRage imports Photoshop's PSD files and preserves all your image's layers and transparency. Again, one of the big advantages of painting digitally is being able to create layers, so having ArtRage keep those intact is really important. It will also preserve all that so exporting back to Photoshop goes just as smoothly.

Here I was able to paint the tree bark and ground behind all the other layers. This saves a lot of time not having to paint around each leaf as I would have to do if I'd painted from front to back with traditional oils.


Detail is often more fun for me than blocking stuff in so I took a little break from the trees to detail the buck's eyeball. What big, beautiful "Bambi" eyes deer have!

All right, back to work on the trees now ...

Oct 14, 2015

Digital Deer and Maple Tree Painting - WIP2

Some more progress on the deer painting. Here I've blocked in the doe and buck. As mentioned in my previous post, one of the advantages of painting digitally is being able to paint without painting over your sketch outlines. I just created a new layer behind the sketch and painted on that.


This is just a rough block-in to get the shape, shadows, and basic colors down, just as you would do with traditional oils. So in this case I just used a basic round Photoshop brush. Later I'll use a special brush I created for adding the fur texture to the deer's coat. I'll explain how to create that brush in a future post.

Oct 10, 2015

Digital Deer and Maple Tree Painting - WIP1

I decided I needed to take a break from bird paintings for a bit so I'm now working on a painting of two whitetail deer lying under a maple tree in autumn. So here's my first WIP (Work-In-Progress) post for this painting.

To save myself some time I'm reusing some of the maple leaves I created in Photoshop for my previous painting of birds in autumn at a bird feeder. I moved them around a bit to approximately where I want the maple's tree branches to hang. Then I created another layer in PS to sketch out the rest of the composition.



One of the nice things about painting digitally is being able to work the painting in any order. Normally, with traditional oil painting, you work from back to front. You paint the most distant background first and work your way forward until you finally finish the main subject and foreground. But in digital painting it's easy for me to create a new layer behind the existing leaves and sketch and paint the tree without having to try to paint around each leaf.

Painting digitally also allows me to keep my sketch available throughout the entire painting so I can continue to reference it and stay on track. With traditional painting the sketch gets painted over and if you start to veer off your original design you might not realize it until it's too late and you have a lot of rework to do. Keeping the sketch overlay keeps things simpler and the layer can be hidden at any time to see how the painting is coming along without the scribbly black lines in the way.

So above is the first stage of my painting, getting the composition laid out and the animals and trees outlined. Next I'll start filling things in and share that in my next WIP post.

Shop Art Supplies

Related Posts Plugin for WordPress, Blogger...